点击图片查看大图
6ES7307-1EA01-0AA0 6ES7307-1EA01-0AA0
Overview
SIMATIC PS 305 和 307 单相负载电源（系统和负载电源）可自动切换输入电压范围，其设计与功能与 SIMATIC S7-300 PLC 最佳匹配。借助于随系统和负载电源提供的梳形连接件，可快速建立 CPU 的电源。也可以向其它 S7-300 系统组件、输入/输出模块的输入/输出电路以及（如有必要）传感器和执行器提供 24 V 电源。通过了广泛的认证（如 UL、ATEX 或 GL），可以通用（不适合室外应用）。
注
SIPLUS extreme 产品基于西门子标准产品。此处的内容摘自相关的标准产品。增加了与 SIPLUS extreme 相关的信息。
|
SIPLUS PS 305, PS 307 |
|||
|
订货号 |
6AG1305-1BA80-2AA0 |
6AG1307-1EA01-7AA0 |
6AG1307-1KA02-7AA0 |
|
订货号 |
6ES7305-1BA80-0AA0 |
6ES7307-1EA01-0AA0 |
6ES7307-1KA02-0AA0 |
|
环境温度范围 |
-25 ... +70 °C |
||
|
防护涂层 |
用于印刷电路板和电子元件的涂层 |
||
|
技术规格 |
除环境条件外，也同样适用标准产品的技术规格。 |
||
|
环境条件 |
|||
|
适应环境条件范围宽 |
|||
|
Tmin ... Tmax，在 1080 hPa ... 795 hPa (-1000 m ... +2000 m) 下 // |
||
|
相对湿度 |
|||
|
100 %；相对湿度，有结露/结霜（不允许在结霜状态下进行调试） |
||
|
电阻 |
|||
|
√；Class 3B2 霉菌和真菌孢子（动物群除外）；运行期间，不使用的接口必须插上接头盖。 |
||
|
√；Class 3C4 (RH < 75%)，包括盐雾，符合标准 EN 60068-2-52（严重程度 3）；运行期间，不使用的接口必须插上接头盖。 |
||
|
√；Class 3S4，包括沙/尘；运行期间，不使用的接口必须插上接头盖。 |
||
Design
- 系统和负载电源可通过螺丝直接固定到 S7-300 标准安装导轨上，并可直接安装到 CPU 的左侧（无需安装间隙）。
- 诊断 LED 灯用于指示“输出电压 24 VDC 正常”。
- 更换模块时，可使用 ON/OFF 开关（运行/待机）
- 输入电压连接电缆配有线鼻子组件
Functions
- 通过自动范围切换 (PS307) 或手动切换（PS307，室外），可连接到所有单相电网 (120 VAC/230 VAC)
- 短时电源故障缓冲
- 输出电压 24 VDC，稳压，防短路，防断路
- 可并联两个电源以提高性能
Technical Specifications
|
Order number |
6AG1305-1BA80-2AA0 |
6AG1307-1EA01-7AA0 |
6AG1307-1KA02-7AA0 |
|
|---|---|---|---|---|
|
SIPLUS PS S7-300 PS305 (EN50155) |
SIPLUS PS307 AC 120/230V / DC 24 V/5 A |
SIPLUS_PS307_10A |
||
|
Supply voltage |
||||
|
Rated value (DC) |
||||
|
Yes |
|||
|
Yes |
|||
|
Yes |
|||
|
Yes |
|||
|
Yes; Rated value 110 V DC |
|||
|
permissible range, lower limit (DC) |
16.8 V |
|||
|
permissible range, upper limit (DC) |
138 V |
|||
|
Rated value (AC) |
||||
|
Yes; 85 to 132 V AC |
Yes; 85 to 132 V AC |
||
|
Yes; 170 to 264 V AC |
Yes; 170 to 264 V AC |
||
|
Overvoltage strength |
2.3x Ue rated, 1.3 ms |
2.3x Ue rated, 1.3 ms |
||
|
Line frequency |
||||
|
47 Hz |
47 Hz |
||
|
63 Hz |
63 Hz |
||
|
Mains buffering |
||||
|
10 ms |
20 ms; min., for Ia rated |
20 ms; min., for Ia rated and Ue = 93 / 187 V |
|
|
1 s |
1 s |
1 s |
|
|
Input current |
||||
|
Rated value at 24 V DC |
2.7 A |
|||
|
Rated value at 48 V DC |
1.3 A |
|||
|
Rated value at 72 V DC |
0.9 A |
|||
|
Rated value at 96 V DC |
0.65 A |
|||
|
Rated value at 110 V DC |
0.6 A |
|||
|
Rated value at 120 V AC |
2.3 A |
4.2 A |
||
|
Rated value at 230 V AC |
1.2 A |
1.9 A |
||
|
Inrush current, max. |
20 A |
20 A; max. at 25 °C, duration max. 3 ms |
55 A; max. at 25 °C, duration max. 3 ms |
|
|
I²t |
5 A²·s |
1.2 A²·s |
3.3 A²·s |
|
|
Leakage current, typ. |
0.7 mA |
0.5 mA |
0.6 mA |
|
|
Leakage current, max. |
3.5 mA |
3.5 mA |
3.5 mA |
|
|
Overload capability overload current |
270 ms on short circuit during startup and operation |
80 ms on short circuit during startup and operation |
||
|
Output voltage |
||||
|
Rated value (DC) |
24 V |
24 V |
24 V; stable at no-load max. 2.5 s |
|
|
permissible range, lower limit (DC) |
23.27 V |
23.27 V |
23.27 V |
|
|
permissible range, upper limit (DC) |
24.72 V |
24.72 V |
24.72 V |
|
|
Power up time, max. |
3 s |
2 ms |
2 s |
|
|
Voltage rise time, typ. |
10 ms |
10 ms |
||
|
Overvoltage protection |
Additional control circuit, cutoff at < 28.8 V, automatic restart |
Additional control circuit, cutoff at < 28.8 V, automatic restart |
||
|
Short-circuit strength |
electronic trip, automatic restart |
electronic trip, automatic restart |
||
|
Output current |
||||
|
Current output (rated value) |
2 A; can be switched in parallel |
5 A; 3 A @ > 60 °C, can be switched in parallel |
10 A; 7 A @ > 60 °C, can be switched in parallel |
|
|
short-circuit protection |
Yes; Electronic |
Yes; Electronic |
||
|
Residual ripple, typ. |
30 mV; Peak - peak |
10 mV; Peak - peak |
15 mV; Peak - peak |
|
|
Residual ripple, max. |
150 mV; Peak - peak |
50 mV; Peak - peak |
50 mV; Peak - peak |
|
|
Continuous short-circuit current, max. |
12 A |
|||
|
Power |
||||
|
Power consumption, typ. |
64 W |
138 W |
240 W |
|
|
Efficiency |
75 % |
90 %; approx., at Ua rated, Ia rated |
||
|
Power loss |
||||
|
Power loss, typ. |
16 W |
18 W; approx., at Ua rated, Ia rated |
27 W; approx., at Ua rated, Ia rated |
|
|
Interrupts/diagnostics/status information |
||||
|
Diagnostics indication LED |
||||
|
Yes; OK for 24 V |
Yes; OK for 24 V |
Yes; OK for 24 V |
|
|
Potential separation |
||||
|
primary/secondary |
Yes; SELV output voltage Ua according to EN 60950-1 and EN 50178 |
Yes; SELV output voltage Ua according to EN 60950-1 and EN 50178 |
Yes; SELV output voltage Ua according to EN 60950-1 and EN 50178 |
|
|
SELV |
Yes |
Yes |
||
|
Isolation |
||||
|
Isolation tested with |
Rated insulation voltage (24 V against input): 150 V AC tested with: 2800 V DC |
Rated insulation voltage (24 V against L1) 250 V AC, tested with 4200 V DC |
Rated insulation voltage (24 V against L1) 250 V AC, tested with 4200 V DC |
|
|
EMC |
||||
|
EMC interference immunity |
EN 61000-6-2 |
EN 61000-6-2 |
EN 61000-6-2 |
|
|
EMC interference emission |
EN 55011 Class A |
EN 55022 Class B |
EN 55022 Class B |
|
|
Degree and class of protection |
||||
|
IP degree of protection |
IP20 |
IP20 |
IP20 |
|
|
Protection class |
1 |
1 |
1; with protective conductor |
|
|
Standards, approvals, certificates |
||||
|
CE mark |
Yes |
Yes |
Yes |
|
|
EN 50155 |
Yes; T1 Cat. 1 Cl. A/B horizontal mounting position |
|||
|
Standard for line harmonics limit |
EN 61000-3-2 |
EN 61000-3-2 |
||
|
Ambient conditions |
||||
|
Ambient temperature during operation |
||||
|
-25 °C; = Tmin |
-25 °C; = Tmin |
-25 °C; = Tmin |
|
|
70 °C; = Tmax; for use on railway vehicles according to EN50155, the rated temperature range -25 ... +55 °C (T1) or 60 °C @ UL/UL hazardous use applies |
70 °C; = Tmax; 60 °C @ UL/cUL, ATEX and FM use |
70 °C; = Tmax; 60 °C @ UL/cUL, ATEX and FM use |
|
|
Extended ambient conditions |
||||
|
Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) |
Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) |
Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) |
|
|
Relative humidity |
||||
|
100 %; RH incl. condensation/frost (no commissioning under condensation conditions) |
100 %; RH incl. condensation/frost (no commissioning under condensation conditions) |
100 %; RH incl. condensation/frost (no commissioning under condensation conditions) |
|
|
Resistance |
||||
|
Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! |
Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! |
Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! |
|
|
Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! |
Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! |
Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! |
|
|
Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! |
Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! |
Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! |
|
|
Dimensions |
||||
|
Width |
80 mm |
60 mm |
80 mm |
|
|
Height |
125 mm |
125 mm |
125 mm |
|
|
Depth |
120 mm |
120 mm |
120 mm |
|
|
Weights |
||||
|
Weight, approx. |
740 g |
0.6 kg |
0.8 kg |
|
